TEMO 450 Electric Outboard Motor 12V Charger
TEMO’s 12V charger has been specially designed to recharge your TEMO·450 aboard your boat, using a cigarette-lighter type socket.
With a power of 100 watts (up to 8.3 amps at 12V), the charger consumes approximately 30 Ah at 12V for a full charge. Your TEMO·450 battery will be fully charged in approximately 3½ hours.
TEMO 450 Electric Outboard Motor Anti-theft Device
The anti-theft device is an essential accessory when you’re heading ashore and don’t want to take your TEMO·450 with you on a hike or if you’re going shopping.
The handcuffs on the lock are rubber-coated to prevent scratching your motor.
Attach one handcuff to the blue tube (which is virtually impossible to remove with basic tools) and the other handcuff to any fixed point (mooring ring or dinghy handle).
TEMO 450 Electric Outboard Motor Buoyancy Kit
Even though your TEMO·450 is waterproof (IP67 certified), it will sink instantly if you let it go. The TEMO·450 buoyancy kit has been designed to bring your motor to the surface. With this made-in-France buoyancy kit, you can install and handle your motor without any risk of it sinking to the bottom.
TEMO 450 Electric Outboard Motor Removable Rowlock Fitting
Your TEMO·450 is supplied with a basic rowlock fitting that screws directly onto the transom of your boat. But if you don’t want to make a permanent installation, or if you have more than one boat, we offer a removable rowlock that can be fitted and taken off again in a matter of seconds. It has all the same features and benefits as the original rowlock.
TEMO 450 Electric Outboard Motor Rowlock Fitting
The rowlock fitting is the accessory that allows you to install and position your TEMO·450 at the stern of your dinghy. It makes the TEMO·450 easier to use because it allows the motor to adjust to the movement of the water, thanks to its horizontal pin. It makes it easy to achieve and maintain the 30 degrees of inclination recommended for optimum operation of your electric motor.
The slot in which your TEMO·450 is inserted allows it to be rotated and gives it a wide range of directional manoeuvre.
The knob is used to secure the motor once it has been installed on the pin of the rowlock fitting. Thanks to this accessory, you can install your motor in less than 10 seconds.
TEMO 450 Electric Outboard Motor Spare 220V/110V Charger
The 220V charger has been specially designed for TEMO·450 motors and is supplied initially when you purchase your motor. With 116 watts of power, it allows you to fully charge the battery of your TEMO·450 in 3 to 3½ hours. This is with an energy consumption of around 0.37 kWh (8 cents per 3½ h).
With the 220V charger, recharge your TEMO·450 from a mains socket (220V).
TEMO 450 Electric Outboard Motor Spare Magnetic Safety Key With Hand Strap
Having a duplicate key is always a good thing… That’s why TEMO offers you a magnetic key with its strap for your TEMO 450 in case you lose yours or simply want to have a duplicate on your bunch of keys.
The wrist strap will allow you a more secure use when you are on the water and allows the key to float if it falls in the water.
This key is made up of a magnet which is installed directly on the TEMO.450 to turn it on.
TEMO 450 Electric Outboard Motor Transport Bag
Made in France, the transport bag is specially designed for your TEMO·450 motor, making it easy to carry thanks to its handle, and protecting your outboard motor from knocks and scratches that might occur during transport or storage.
The bag is reinforced at both ends and has a YKK zip suited to the salty environment.
Nozzle up or nozzle down, whether over the shoulder or slung over your back, carry it however you like!